Local Insulation Contractor in Richland WA - Fewer Drafts and a Cooler Upstairs
Comfort Richland Insulation Company insulates attics in Richland, Kennewick and the cities around them. For houses that run hot upstairs in July and cold underfoot on winter nights, we also insulate crawl spaces and seal the drafty gaps.
- Fully licensed and insured.
- Free estimates at your property.
- We respond within 1 business day.
Insulation contractor services in Richland, WA
Comfort Richland Insulation Company is an insulation contractor in Richland, WA, and we handle 16 kinds of work, from topping up an attic to sealing a crawl space. Most calls start with a drafty room, cold floors or a power bill that keeps climbing. The price mostly turns on the size of the space, how many inches are already up there, whether old material has to come out first and whether you want foam or loose fill. The schedule turns on that same cleanup and on any permit the city or county wants. Your free written estimate lists each step in order, so you can see where the cost sits.
Spray foam insulation
We spray foam into rooflines, walls and the room over the garage, where it expands into the gaps and seals air while it insulates.
Attic insulation
Hot upstairs all summer? Most of the time the attic is short on insulation or leaking air, and we fix both in the right order.
Blown-in insulation
Blown-in insulation is loose fill we blow through a hose, laid to an even depth all the way out to the eaves, where most attics come up thin.
Home insulation
For a house that's drafty in more than one place, we look at the attic, walls and crawl space together and plan the work as one job.
Insulation removal
Old insulation that got soaked or filled with droppings comes out first, because fresh material laid over it only hides the problem. We bag it and clean the space.
Crawl space insulation
Cold floors in winter usually trace back to the crawl space. We insulate under the floor so the rooms above hold their heat.
Wall insulation
Wall insulation is for older houses with thin or empty walls, and for remodels where the walls are already open and easy to fill.
Air sealing services
What does air sealing do? It closes the gaps around pipes, wires and outlets where outside air slips into the house and your heat slips out.
Basement insulation
We insulate basement walls and the band where the floor framing sits on the foundation, for a basement you use now or plan to finish.
Closed-cell foam insulation
Closed-cell foam is a dense foam that blocks moisture as well as heat, which makes it a good fit for crawl space walls and other damp spots.
Open-cell foam insulation
Open-cell foam is softer and lighter, and it fills rooflines and interior walls well for less than closed-cell. It suits places where moisture isn't the worry.
Commercial insulation
Property managers and business owners call us for offices, shops and rentals, and we plan the work around when your building is in use.
Crawl space vapor barrier
A crawl space vapor barrier is heavy plastic laid over the dirt and up the walls, so ground moisture stays down there instead of reaching the floor framing.
Vapor barrier installation
We put vapor barriers on the warm side of walls and ceilings where the house needs one, so moisture from inside doesn't settle in the insulation.
Attic air sealing
Recessed lights, plumbing stacks, wire holes and the attic hatch leak warm air all winter. We seal them before any insulation goes up, so it isn't fighting a draft.
Retrofit insulation
Retrofit insulation adds to an older house without tearing it apart, filling walls from small holes and topping up the attic over what's still good.
Why homeowners hire our small Richland crew
We're a small crew, and the way we work comes down to doing things in order and being straight with you. Here's what that looks like in your attic, walls or crawl space.
Old problems handled before new insulation
Wet or droppings-filled insulation comes out, and gaps around lights, pipes and the hatch get sealed before anything new goes in. My dad taught me the part nobody sees still has to be right.
The person who estimates works the job
I come out to look at your house and write the estimate, then I work alongside our installers on the job, so nothing gets lost between what we said and what we do.
Estimates you can compare with other bids
Your written estimate lists each step in the order we'd do it, from cleanup and sealing to the insulation itself, so you can set it beside another bid and see what's included.
A straight answer if it can wait
If the insulation you have can stay, or the job can wait, I'll tell you plainly. Call (509) 946-4684 or send us the details to set up a time for me to take a look.
Our insulation process, from your call to walkthrough
Here's how a job goes from your side, starting with a reply within one business day and a free estimate at your property.
Call or send the form
Call (509) 946-4684 or use the form and tell us what's bothering you, whether that's a hot upstairs, cold floors or a power bill that keeps climbing. We get back to you within one business day and set a time for me to come out to your house.
I look it over and write it up
I go up in the attic and look over the walls or crawl space, checking how many inches are already there and what shape they're in. I'll ask about anything that burns fuel, like a furnace or water heater, since sealing can change how it draws air. You get a free written estimate listing each step in order, with no obligation.
We do the work in order
On the day, we cover floors and the path to the attic or crawl space before anything comes in. Then we work in the order the estimate lists, usually clearing old material and sealing gaps first, so the new insulation goes into a space that's ready for it.
Walkthrough before we pack up
Before we leave, I walk you through what we did and show you the finished space if you'd like to see it. We clean up as we go, so the only thing left behind is the insulation, and you know exactly what's in your house.
Tell us what's going on in your attic or crawl space
We reply within one business day to set a time for me to come look. The estimate is free, written out step by step, and there's no obligation to go ahead.
(509) 946-4684- Based in
- Richland, WA 99352
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 6 AM–11 PM
Insulation work, up close
Photos of common insulation work, from blown-in attic floors to sprayed foam and crawl space vapor barriers, so you can see what each type looks like once it's in.
About our small insulation crew in Richland
Comfort Richland Insulation Company is an insulation contractor based in Richland, WA, and I started it in 2023 after years of hauling bags into attics and working beside my dad. We're fully licensed and insured. We work in 8 cities with their own page on this site, plus others nearby, including some across the state line in Oregon. You can read more about how we got started and how we work.
- services
- 16
- service areas
- 8
- founded
- 2023
- 3 years in business
Insulation work in Richland and the Tri-Cities
Richland sits on the Columbia River, and a lot of everyday life here happens along it. Howard Amon Park pulls people of all ages to the riverfront, Leslie Groves Park runs long and narrow beside the river with trails and a boat ramp, and the REACH Museum tells the story of the Mid-Columbia and the Manhattan Project.
For insulation, the weather here matters more than any landmark. July days average near 90°F and the city sees about 87 freezing nights a year, so an attic has to hold back summer heat and winter cold, and a crawl space has to keep the floors above from going cold. We're based in Richland and do the same work across the Tri-Cities and the cities around it.
Cities we serve around Richland, WA
Comfort Richland Insulation Company is based in Richland, WA, and we work in the cities around it, including some across the state line. The 8 cities below each have their own page, from Kennewick to Umatilla, OR. They aren't the only places we go, so call if you don't see yours.
Questions about insulation in Richland, WA
How much does attic insulation cost in Richland, WA?
It depends on the size of the attic, how much is already up there and how much prep comes first, so I price it after I've looked. Pulling out soaked or droppings-filled insulation and sealing gaps add labor before any new material goes in, while a clean attic that just needs topping up costs less. Your free written estimate lists each step, so you can see where the money goes.
Is spray foam worth the extra cost over blown-in insulation?
For a plain attic floor, usually not, because sealing the gaps and topping up loose fill gets you most of the way for less. Foam costs more but seals air while it insulates, so it earns its price when your ductwork runs through the attic or the space is tight and oddly shaped.
How long does an insulation job take, and do we have to leave the house?
A top-up in an open attic goes quicker than a job that starts with removal and sealing, and I'll tell you what yours needs when I write the estimate. With blown-in you can usually stay home. With spray foam, you, the kids and the pets need to be out while it's sprayed and until the re-entry time passes, which is the wait before it's safe to come back in.
Does an insulation contractor need a license in Washington State?
Yes, Washington requires every construction contractor to register with the Department of Labor & Industries, and state law also requires them to be bonded and insured. We're fully licensed and insured. On a home job of $1,000 or more, the contractor also has to give you the state's disclosure notice to customers.
What should an insulation contractor check in my attic before insulating?
They should look for gaps around recessed lights, pipes and the hatch, the vents at the eaves, and old insulation that's wet or dirty. Buried eave vents stop the attic from breathing and moisture shows up in the framing, so we keep them clear with baffles, short chutes that hold the insulation back, and we fill out to the edges instead of piling it up in the middle.
Do you guarantee your insulation work?
Yes, our work is backed by our satisfaction guarantee. Some insulation products also carry their maker's own warranty, separate from our guarantee, and I'll point that out on the estimate if the product we're using has one.
Can new insulation go over the old insulation in my attic?
Often it can, if the old layer is dry, clean and lying flat, and I'll measure how many inches are up there and tell you plainly if it can stay. If it's been soaked or is full of droppings, it comes out first, because new material laid over it just hides the problem.
Do I need a permit to insulate my house in Richland, WA?
It depends on the job and the address, so before any job starts I check with the city or county building office for your address. If a permit is needed, we take care of it and let you know where things stand. If you'd like to ask the City of Richland yourself, its Permit Center asks owners to call early, at 509-942-7794, option 1.
Richland, WA
Get an insulation estimate for your Richland home.
Call (509) 946-4684 or send the form, and we'll reply within one business day to set up a free look at your attic, walls or crawl space, with no obligation.