Insulation contractor in Pasco, WA - gaps sealed first, then insulated
Comfort Richland Insulation Company is a small insulation contractor based in Richland, WA, working in Pasco homes and buildings. We fix drafty rooms, cold floors and hot upstairs rooms by sealing gaps and insulating attics, walls and crawl spaces.
- Fully licensed and insured.
- Free estimates at your property.
- We respond within 1 business day.
Pasco homes we work in, old and new
Pasco gives us a real mix of houses. Near downtown we find older homes that have been lived in for decades. Farther out are newer neighborhoods where the houses still have their first round of insulation. Managers of offices, shops and rentals in town also call us about their power bills. We see the same mix across the river in Kennewick and down in Finley.
The age of the house decides where we start. In an older one we look hard at what's already up there before adding to it, and in a newer one we're usually filling in where the builder came up short.
Insulation services we offer in Pasco
Spray foam insulation
Spray foam seals and insulates in one pass, so it suits the spots in Pasco homes that loose fill can't reach, like vaulted ceilings and walls opened up for a remodel.
Attic insulation
Most Pasco calls about a hot upstairs or a high power bill start in the attic, so we check what's already up there before adding anything.
Blown-in insulation
Blown-in fill is loose material blown through a hose, and it tops up the thin attics we find in older Pasco houses with an even depth out to the eaves.
Home insulation
If several rooms in your Pasco house feel drafty, we look at the attic, walls and crawl space together and tell you which to fix first.
Insulation removal
Soaked or droppings-filled insulation in an older Pasco attic comes out first, because new material laid over it just hides the problem.
Crawl space insulation
Cold floors in a Pasco house with a crawl space usually trace back to bare or sagging insulation under the floor, which we replace and hold in place.
Wall insulation
Empty walls in older Pasco houses can be filled through small holes that we patch afterward, so the rooms along the outside walls stop feeling drafty.
Air sealing services
Air sealing means closing the gaps before insulating, from the crawl space up through the walls, and it often fixes a drafty Pasco room before any new insulation goes in.
Basement insulation
When a Pasco house has a basement, bare concrete walls pull heat from the rooms above, so we insulate them without trapping moisture behind.
Closed-cell foam insulation
Closed-cell foam is a dense foam that blocks moisture. It suits crawl space walls and the framing along the foundation in Pasco homes where air and damp both need stopping.
Open-cell foam insulation
Open-cell foam is softer and lighter, and it fits rooflines and walls in a Pasco house where stopping air matters more than stopping moisture.
Commercial insulation
Pasco property managers and business owners call us about offices, shops and rentals with high power bills, and we plan the work around your hours.
Crawl space vapor barrier
A plastic cover laid over the dirt in a Pasco crawl space keeps ground damp away from your floor insulation and framing, so the insulation stays dry and keeps working.
Vapor barrier installation
We add a vapor barrier where a wall, floor or ceiling in a Pasco home needs one, on the side where it keeps moisture from settling into the insulation.
Attic air sealing
Before topping up a Pasco attic, we close the gaps where wires, flues and interior walls come through the attic floor, so new insulation isn't fighting a draft.
Retrofit insulation
For an older Pasco house you're living in, we add insulation to what's already there and work around finished rooms instead of opening them up.
Get a free on-site insulation estimate in Pasco
Send the form and we'll reply within one business day to set a time for me to come out. The estimate is free and done at your house, and there's no obligation.
(509) 946-4684- Based in
- Richland, WA 99352
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 6 AM–11 PM
Working in Pasco: permits, licenses and what moves the price
The City of Pasco's Building Division issues building permits, and the city requires one for most construction. Before a job starts, I check with them about your address. If a permit is needed, we take care of it and let you know where it stands. You can check two things about any contractor who comes out. One is their registration with the state Department of Labor & Industries, L&I. The other is the business license Pasco requires from anyone doing business inside city limits. We're fully licensed and insured, and every job is backed by our satisfaction guarantee.
Most of the price in Pasco comes from what's already in the attic or crawl space. That means how much old material has to come out, how many gaps need sealing, how easy the space is to get into, and whether loose fill or foam fits the house. The schedule turns on that same removal work plus any permit review. Your own figure comes on the written estimate, which lists each step in the order we'd do it. We price jobs the same way in Richland and West Richland, since we're based in Richland and work across the Tri-Cities.
Why Pasco houses feel drafty or hot upstairs
In older Pasco houses the attic usually holds a few inches of insulation that has settled over the years. The gaps around can lights, pipes and the hatch were never closed, so air slips straight past whatever's up there. We seal those gaps first and then top up the insulation. We keep the new material off the eave vents so the attic can still breathe and the framing stays dry.
Newer homes have a different problem. The room over the garage and the edges of the attic often got less insulation than the middle, which is backward, so those are the spots we fill. If your ductwork runs through the attic, we'll talk with you about foam there.
What happens when you call us in Pasco
Here's how a Pasco insulation job runs, from your first call to the walkthrough at the end, and where you come in.
Call or send the form
We get back to you and set a time for me to come out, because I write every estimate myself. It helps if you're home so you can show me the rooms that bother you.
I come out and look
I go through the attic, walls or crawl space and ask about anything in the house that burns fuel, because sealing a house tighter changes how those appliances get their air. You get a free written estimate that lists each step in the order we'd do it, so you can see what's needed now and what can wait.
We handle any needed permit
If the Building Division says your job needs a permit, we take care of it, and the city's review for residential permits runs 5 to 7 business days. We set the work day once it's through and keep you posted until then.
We insulate and walk you through
On the day, we cover your floors and walkways, do the work in the order on your estimate, and I'm up there working alongside the installers. Before we pack up, I walk you through what we did and what we found.
Insulation questions we hear in Pasco
Do I need a permit to insulate my attic in Pasco?
The city's list of small projects that can skip a permit doesn't settle it, because the list names things like sheds, decks, fences and roof or siding replacement, not insulation. A permit is still needed to replace structural parts like framing or sheathing, which matters if we open an attic and find damaged framing. That's why I check your address with the Building Division before any job starts.
How do I check that an insulation contractor is registered in Washington?
Look the contractor up with the state Department of Labor & Industries, because every construction contractor in the state has to register there and be bonded and insured. The bond is $15,000 for specialty contractors and $30,000 for general contractors, and the law requires the registration number on their ads and bids. On any home job of $1,000 or more, they also have to give you the state's disclosure notice to customers.
How much does insulation cost for a house in Pasco?
Your price comes on the written estimate after I've seen the house, because most of the cost is set by what's already up there. Foam costs more than loose fill because it seals air while it insulates. Unless your ductwork runs through the attic, I usually suggest sealing the gaps and topping up with blown-in fill. If the old insulation is dry and clean, it stays, and that keeps the cost down.
What causes cold floors and a hot upstairs in a Pasco house?
Cold floors usually come from a crawl space with missing or sagging insulation. A hot upstairs usually comes from a thin attic with open gaps letting air through. In both cases the insulation can look fine at a glance while air moves right past it, so I check both ends of the house on the estimate visit.
Do we need to leave our Pasco home during spray foam insulation?
For spray foam, yes. You, the kids and the pets stay out until the re-entry time, which is when it's safe to come back inside, and I tell you that window before the day so you can plan. For blown-in fill and air sealing, most people stay home and just keep clear of the rooms we're working in.
How long does attic insulation take in Pasco, from first call to finished?
The work in the attic is usually the short part. The longer stretch comes before it, while I look the house over and the city reviews a permit if your job needs one, as the steps above lay out. Jobs where old insulation has to come out take longer, because removal and sealing go slower than blowing in new fill, and I'll tell you what to expect once I've seen your attic.
Richland, WA
Have your Pasco house looked at first
Call (509) 946-4684 or send the form, and I'll tell you whether your house needs new insulation or just a few gaps sealed, before you spend anything.